Okay, I'm going to have to break down and spend some money on my carry rig again. I went shooting over the weekend, and while I typically shoot my carry gun, I will only run it with carry ammo every third outing or so due to the expense of running 50 HST's down range to punch holes in paper. That said, I drew pistol from holster, fired 16 rounds to slide lock, dropped empty magazine while reaching into pocket for spare mag which rides in a Galco pocket mag pouch, loaded spare mag, ran the slide home and fired three or four shots from spare mag before having the gun go into battery. Tapped and racked, perfectly good round ejected, but same issue. Long story short, some pocket lint followed the round into the chamber and the nice tight chamber of my P99 prevented the gun from going into battery. After correcting that little bobble, the gun ran perfectly. Upon inspection of the Galco mag pouch, there's a little a spot along the bottom where there is no stitching to prevent debris from entering. I now need to find a new in the pocket carrier for a spare mag. Any suggestions for something that's completely closed and low bulk (keep in mind I wear tailored suit pants on a regular basis and the rest of my pants are more form fit than baggy)?