General Gun Discussion > Gunsmiths Corner

Yugo SKS gas pin/valve won't function...

(1/1)

headfirst:
its locked in the rifle position (which is better than the grenade position), but I cant get the tube out to clean it in this position. Hit it with WD40, still locked up. Any thoughts are appreciated.

Thanks,
hf

Blue Hen Firearms:
Do you have the gas tubelock rotated into the correct position? It should be slightly upward. If that is a yes try this, put a generous helping of CLP on the gas rod and let it soak in for a few minutes. Then try to carefully, and I do stress carefully, coerce it out with a rubber dead blow hammer or the like. If it dosen't start to give DO NOT FORCE it, you don't want to take a chance and break anything. Sometimes SKS's will develop a gas leak which in turn will crud it up even more. I will do some more research on the problem and post anything else I may find.

headfirst:

--- Quote from: Blue Hen Firearms on February 12, 2009, 03:11:18 AM ---Do you have the gas tubelock rotated into the correct position? It should be slightly upward. If that is a yes try this, put a generous helping of CLP on the gas rod and let it soak in for a few minutes. Then try to carefully, and I do stress carefully, coerce it out with a rubber dead blow hammer or the like. If it dosen't start to give DO NOT FORCE it, you don't want to take a chance and break anything. Sometimes SKS's will develop a gas leak which in turn will crud it up even more. I will do some more research on the problem and post anything else I may find.

--- End quote ---

Success!!!!! All sorted out and cleaned. I think that's exactly what happened. Leak lead to fouling and build-up. Can't wait to see how it cycles now.

Thanks a bunch for the reply BH,
hf

Blue Hen Firearms:
Great glad it worked. The SKS is fun and cheap to shoot but they develop their own little problems sometimes. Good shooting

[attachment deleted by admin]

Navigation

[0] Message Index